Sign In | Join Free | My himfr.com
Home > Air Filter Adhesive >

800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive

    Buy cheap 800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive from wholesalers
     
    Buy cheap 800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive from wholesalers
    • Buy cheap 800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive from wholesalers
    • Buy cheap 800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive from wholesalers

    800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive

    Ask Lasest Price
    Brand Name : Chang Feng
    Model Number : 9009-54-3
    Certification : ISO9001
    Price : Negotiable
    Payment Terms : L/C, T/T
    Supply Ability : 20 Ton/Tons per Month PU glue A black and B for heavy duty air filter production
    Delivery Time : 8-10 work days
    • Product Details
    • Company Profile

    800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive

    Blue And Red PU Glue Customized Capacity For Air Filter/Air Filters Material


    1. Product introduction


    Two-component polyurethane adhesive for machine

    component proportion ratio is 100:25


    2. Parameter table



    Two-component polyurethane adhesive for machine

    component proportion ratio is 100:25

    Material-AMaterial-B
    WeightSmall barrel :25KG6.25KG
    Big barrel :50KG12.5KG
    Physical natureorange-red viscous liquid (color based on your request to configure)brown-yellow liquid
    viscosity800-1000MPa.S(25°C)25-50MPa.S(25°C)
    density1.02g/ml1.02g/ml
    packagePlastic bucket or Tin bucketPlastic bucket ,Tin bucket, Plastic pots
    storage1. Material-A and material-B can store up 3-6 months.
    2. To appropriate indoor storage above 15°C

    3. Method of operation


    1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.

    1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the material until

    2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation

    3.Material temperature controlled 24°C-28°C appropriate then you can start operation.

    4. Must be clean before using the mould release agent (Note:

    The new plastic mould can be wiped free)

    5 .If A and B is not reaction please measuring A and B ratio.

    6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal


    4. Do’s and don’ts


    1. The products are generally stored in a dry room, and pay attention to water, moisture and sun. Must cover the plug and cover, to avoid absorbing rubber moisture in the air, affect the results

    2. Mould must be painted in front of the mould release agent,to be poured glue dry before.

    3. A.B glue in ordinary temperature of 25 °C properly used, if the temperature is too high or too low will affect the use effect. You must use artificial methods of cooling or heating.


    800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive

    Quality 800-1000MPa.S Air Filter Adhesive , Silicone Two Component Epoxy Adhesive for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Anping Changfeng filter material factory
    *Subject:
    *Message:
    Characters Remaining: (0/3000)