Sign In | Join Free | My himfr.com
Home > Air Filter Adhesive >

Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged

    Buy cheap Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged from wholesalers
     
    Buy cheap Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged from wholesalers
    • Buy cheap Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged from wholesalers
    • Buy cheap Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged from wholesalers

    Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged

    Ask Lasest Price
    Brand Name : Chang Feng
    Model Number : Chang Feng
    Certification : ISO9001
    Price : Negotiable
    Payment Terms : L/C, T/T
    Supply Ability : 20 Ton/Tons per Month PU glue A black and B for heavy duty air filter production
    Delivery Time : 8-10 work days
    • Product Details
    • Company Profile

    Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged

    AB Polyurethane Two-Component Adhesive Glue 6/1 And 5/1 Hydraulic Oil Filter Glue For Filter


    1. Product introduction


    Two-component polyurethane adhesive for machine

    component proportion ratio is 100:25


    2. Parameter table



    Two-component polyurethane adhesive for machine

    component proportion ratio is 100:25

    Material-AMaterial-B
    WeightSmall barrel :25KG6.25KG
    Big barrel :50KG12.5KG
    Physical natureorange-red viscous liquid (color based on your request to configure)brown-yellow liquid
    viscosity800-1000MPa.S(25°C)25-50MPa.S(25°C)
    density1.02g/ml1.02g/ml
    packagePlastic bucket or Tin bucketPlastic bucket ,Tin bucket, Plastic pots
    storage1. Material-A and material-B can store up 3-6 months.
    2. To appropriate indoor storage above 15°C

    3.Production process


    1. Material-A should stirred evenly with plastic hand electric drill, material-B can shake, before used.

    2. Open the electrocaloric plate temperature to 40-50 degrees, in winter material-A and material-B with a small container to preheat.

    3. Wipe the mould with release agent

    4. Each 1kg A add 3-6g water, also according to the local environment, such as the humidity in the air, workshop environment.

    5. material-A and material-B are mixed at the mixture ratio of 100:40 ratio, then add 40% talcum powder(heavy calcium powder)(100:40:50±5), with 2800 rev / min motor to mix, mixing time determined by the amount of adhesive, per 100g of adhesive is approximately 7-10 seconds .

    6. Pour the Mixed liquid into mould, then put the paper element and give a little pressure on it. 8-15 minutes later you can bring the mould down.

    4. Method of operation


    1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.

    1.Everytime the plastic injection machine plastic injection A material must be full before the shaking in order to the material until

    2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation

    3.Material temperature controlled 24°C-28°C appropriate then you can start operation.

    4. Must be clean before using the mould release agent (Note:

    The new plastic mould can be wiped free)

    5 .If A and B is not reaction please measuring A and B ratio.

    6. A and B must be sealed to .To avoid the air and water vapor reaction, as a result affecting the effect of colloidal


    Two Component Solvent Based Pu Adhesive Plastic Bucket PackagedTwo Component Solvent Based Pu Adhesive Plastic Bucket PackagedTwo Component Solvent Based Pu Adhesive Plastic Bucket PackagedTwo Component Solvent Based Pu Adhesive Plastic Bucket Packaged

    Quality Two Component Solvent Based Pu Adhesive Plastic Bucket Packaged for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Anping Changfeng filter material factory
    *Subject:
    *Message:
    Characters Remaining: (0/3000)