Stainless Steel Stretch Mesh Architectural Decoration Ceiling Metal
Decorative Mesh
1. Product Introduction
Steel grating plate is also called steel grating plate. The grating
plate is a kind of steel product which is cross arranged with flat
steel according to a certain spacing and cross bars, and welded
into a square lattice in the middle. It is mainly used as ditch
cover plate, steel structure platform plate, step plate of steel
ladder, etc. the cross bars are generally twisted square steel.
2. Parameter table
| EXPENDED FLATTENED MESH |
| LWD(mm) | SWD(mm) | Strand Width | Strand Gauge | %Free Area | Approx.Kg/m2 |
| 6.05 | 3.38 | 0.5 | 0.8 | 50 | 2.1 |
| 10.24 | 5.84 | 0.5 | 0.8 | 75 | 1.2 |
| 10.24 | 5.84 | 0.9 | 1.2 | 65 | 3.2 |
| 3.80 | 2.10 | 0.8 | 0.6 | 46 | 2.1 |
| 14.20 | 4.80 | 1.8 | 0.9 | 52 | 3.3 |
| 24.40 | 7.10 | 2.4 | 1.1 | 57 | 3.4 |
| 23.20 | 5.80 | 3.2 | 1.5 | 43 | 6.3 |
| 32.70 | 10.90 | 3.2 | 1.5 | 59 | 4 |
| 33.50 | 12.40 | 2.3 | 1.1 | 71 | 2.5 |
| 42.90 | 14.20 | 4.6 | 2.7 | 58 | 8.6 |
| 39.10 | 18.30 | 4.7 | 2.7 | 60 | 7.6 |
| 43.20 | 17.08 | 3.2 | 1.5 | 69 | 3.2 |
| 69.80 | 37.10 | 5.5 | 2.1 | 75 | 3.9 |
3. Product application
Products used in various industrial fields. The center distance of
loaded flat steel of this series of steel grating is 30mm, which
meets the provisions of American standards. In the whole steel
grating series, it has the strongest resistance to surface impact.
It is widely used in power plants, refineries, sewage treatment
plants, granaries, chemical plants, highways, airports, wharfs and
other platforms, walkways, drainage ditch covers, stair steps and
so on. The toothed steel grating can be used in wet and greasy
places, especially for offshore oil production platforms.
4. Product advantages
Not easy to stain, easy to clean and maintain; The punching net of
aluminum plate has great advantages, and the non adhesion of
fluorine coating film makes it difficult to attach pollutants to
the surface of aluminum plate, which has better cleanliness.
.
5. Production process
Cut the whole roll of plate to the size you need. If the plate edge
in the manufacturing process exceeds the tolerance range you
require, our skilled technicians can remove the excess edge
according to your requirements
6. Installation method
A mounting hole is reserved on the edge of the completed punching
net and fixed by screws or rivets. The use of screw fixation is
mainly used in mechanical protection, external wall decoration, the
use of rivets fixed installation is mainly used in indoor ceiling
and other fields.
7. Matters Needing Attention
Stainless steel punching net heat conduction is small, heating
expansion is big (austenitic whole system) , so when punching
processing should choose cutting fluid with better cooling
performance to lubricate. The special properties of 304 Metal
Piercing Mesh are greatly affected by temperature, and the
formability is greatly affected by temperature and speed. Generally
high temperature, high speed, under the condition, the n value
reduces, the forming part deteriorates. Therefore, using the
temperature effect of the volume of warm processing methods can
obtain excellent stamping performance.
Firstly, the punching net must not be cleaned with acidic or
alkaline cleaning agent, but with a special cleaning agent for
cleaning metal.
8. Packing method
What kind of packing is used for the perforated screen board, can
be packed according to the user’s requirements or the amount of
packing is less than without the approval of the customer.
